Removal and installation of the main brake cylinder. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
9.1. General information
9.2. Brake mechanisms of forward wheels
9.3. Brake mechanisms of back wheels of drum-type type
9.4. Brake mechanisms of back wheels of disk type
9.5. Drive of brakes
9.5.1. Removal and installation of the main brake cylinder
9.5.2. Removal and installation of the vacuum amplifier
9.5.3. Air removal from a hydraulic actuator of brakes
9.5.4. Adjustment of lay brake system
9.6. Anti-blocking system of brakes
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 







993f9bf4 993f9bf4 993f9bf4

9-5-1-snyatie-i-ustanovka-glavnogo-tormoznogo-cilindra.html

9.5.1. Removal and installation of the main brake cylinder


Fig. 7.13. Details of a drive of brakes: And — without ABS; B — c ABS; and — to the vacuum pump; 1 — a tank cover; 2 — a tank; 3 — sealing rings of a tank; 4 — the main brake cylinder; 5 — pressure regulators; 6, 7 — pistons of brake contours; 8 — sealing laying of the main brake cylinder; 9 — the stoplight switch; 10 — spring шплинт; 11 — a brake pedal; 12 — laying; 13 — an axis of a pedal of a brake; 14 — the vacuum amplifier; 15 — a vacuum hose


At work be guided fig. 7.13. Open a cowl. By means of a syringe pump out brake liquid from a tank. On the car with the petrol engine remove an air line. Remove a tank and sealing rings. Disconnect from the cylinder unions of brake tubes, having marked them. Take measures for prevention of the passage of brake liquid. Muffle openings to avoid dirt hit in them. Turn on from the vacuum amplifier of a nut of fastening of the main brake cylinder and remove it.
Installation make in sequence, return to removal. Thus tighten carving connections by the ordered moment. After installation of the main cylinder remove air from a hydraulic actuator of brakes.


«previous page
9.5. Drive of brakes
following page»
9.5.2. Removal and installation of the vacuum amplifier