Removal and installation of the brake mechanism. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
9.1. General information
9.2. Brake mechanisms of forward wheels
9.3. Brake mechanisms of back wheels of drum-type type
9.4. Brake mechanisms of back wheels of disk type
9.4.1. Replacement of brake shoes
9.4.2. Removal and installation of the brake mechanism
9.4.3. Replacement of a brake disk
9.5. Drive of brakes
9.6. Anti-blocking system of brakes
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 







993f9bf4 993f9bf4 993f9bf4

9-4-2-snyatie-i-ustanovka-tormoznogo-mekhanizma.html

9.4.2. Removal and installation of the brake mechanism


Fig. 7.12. Bolts (1) fastening of directing fingers and bolts (2) fastenings directing brake shoes to an axis of a nave of a wheel


Lift a back part of the car and remove wheels, having noted their situation concerning naves. Pump out by means of a syringe brake liquid from a tank. Disconnect from a support the union of a brake hose, having taken measures to avoid the passage of brake liquid. Muffle openings to prevent dirt hit in brake system. Disconnect a cable of a drive of the parking brake. By means of a screw-driver slightly move the piston in the brake cylinder. Unscrew two bolts of fastening directing (fig. 7.12). Remove knot of a support and directing with brake shoes assembled. Take out brake shoes. Check and clear all details.
Installation make as it should be, the return to removal. Remove air from system of a hydraulic actuator of brakes and adjust lay brake system.

«previous page
9.4.1. Replacement of brake shoes
following page»
9.4.3. Replacement of a brake disk