9.2.3. Replacement of a brake disk
Brake disks replace only with pairs with simultaneous installation of new blocks. Remove the brake mechanism, without disconnecting from it a brake hose, take him aside and suspend by means of a wire so that the brake hose did not stretch. In two openings available on a nave screw two bolts М8х1,25 and, evenly tightening them, shift a brake disk from a nave.
Before installation clear surfaces of interface of a disk with a nave. Clear new disks of konservatsionny greasing. Execute the remained assembly operations as it should be, the return to removal. Several times press a brake pedal for installation of blocks into position.