8.2.8. Removal and installation of the pump of the hydraulic booster
Fig. 6.9. Details of system of the hydraulic booster:
And — without ABS; B — with ABS; In — cars with the petrol engine; G — cars with the diesel engine; Д — without system of cooling of oil; Е — with system of cooling of oil; 1 — a tank;
2 — the pump of the hydraulic booster; 3 — a hose; 4 — the pipeline; 5 — an oil radiator
Fig. 6.10. Details of the pump of the hydraulic booster of a steering: And — cars with the petrol engine; B — cars with the diesel engine; 1 — a pulley; 2 — a lock ring; 3 — a power shaft; 4 — a cuff; 5 — the pump case; 6 — a sealing ring; 7 — a distributive disk; 8 — blades; 9 — a rotor; 10 — pins; 11 — a stator; 12 — a pump cover; 13 — a fastening arm; 14 — the adjusting valve; 15 — a tension regulator
Details of system of the hydraulic booster of a steering are shown on fig. 6.9 and 6.10
. Press the pipelines suitable to the hydraulic booster, or pump out liquid from a tank of the hydraulic booster. Remove an arm supporting a plait of wires. On cars with the petrol engine remove from the right rack of a suspension bracket an arm of the top fastening. Disconnect pipelines from the case of the pump of the hydraulic booster, having muffled openings jams. Take aside hoses, wires, sockets. Turn out the bottom bolt of fastening of the pump of the hydraulic booster and a bolt of a natyazhitel of a driving belt; remove a belt. Turn out the remained bolts of fastening of the pump of the hydraulic booster and remove the pump.
Installation is carried out to sequences, return to removal.
Replace new sealing washers on pipelines.
Tighten details of fastening the demanded moment.
Remove air and fill system of the hydraulic booster of a steering (see below).
Check laying, and also connection of electric wires and pipelines.