Check of effort of moving of a gear lath. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
8.1. General information
8.2. Steering repair
8.2.1. Removal and installation of a shaft of a steering
8.2.2. Removal and installation of the steering mechanism
8.2.3. Check of a free wheeling of a steering wheel
8.2.4. Check of axial moving of the mechanism
8.2.5. Check of effort of turn of a steering wheel
8.2.6. Check of effort of moving of a gear lath
8.2.7. Adjustment of an emphasis of a lath
8.2.8. Removal and installation of the pump of the hydraulic booster
8.2.9. Dismantling and assembly of the pump of the hydraulic booster
8.2.10. Air removal from system of the hydraulic booster
8.2.11. Adjustment of a tension of a belt of a drive of the hydraulic booster
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

8-2-6-proverka-usiliya-peremeshheniya-zubchatojj-rejjki.html

8.2.6. Check of effort of moving of a gear lath

Lift a forward part of the car and remove wheels. Disconnect tips of steering drafts from rotary fists. Disconnect the kardanny hinge located between shaft of a steering and the steering mechanism for what unscrew a fastening bolt. Start up the engine, warm up working liquid in steering system to 60 — 80 °C. Measure by means of a dynamometer attached to steering draft, effort of moving of a lath from its average situation. If the measured effort exceeds 284 N, it is necessary to replace the steering mechanism. Connect the kardanny hinge and establish steering drafts into place. Execute other assembly operations as it should be, the return to dismantling.


«previous page
8.2.5. Check of effort of turn of a steering wheel
following page»
8.2.7. Adjustment of an emphasis of a lath