Removal and installation of a rack of a back suspension bracket. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.2. Back suspension bracket
7.2.1. Removal and installation of a rack of a back suspension bracket
7.2.2. Dismantling and assembly of a rack of a back suspension bracket
7.2.3. Removal and installation of a beam of a back suspension bracket
7.2.4. Replacement of a nave of a back wheel
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

7-2-1-snyatie-i-ustanovka-stojjki-zadnejj-podveski.html

7.2.1. Removal and installation of a rack of a back suspension bracket


Fig. 5.13. Fastening of a rack of a back suspension bracket to a body: 1 — bolts of fastening are resistant to a body;
2 — a nut of a rod of the shock-absorber


Fig. 5.14. A bolt of fastening of a rack of a back suspension bracket to a beam of a back suspension bracket


Lift a back part of the car, establish on supports and remove a wheel from the necessary party. In a luggage compartment cast away a rug, remove a protective cap and unscrew two nuts 1 (fig. 5.13) of the top fastening of a rack of a suspension bracket. From below the car unscrew a bolt of fastening of a rack to a beam of a back suspension bracket (fig. 5.14). Take out a rack through a wheel arch.
Installation carry out as it should be, the return to removal.


«previous page
7.2. Back suspension bracket
following page»
7.2.2. Dismantling and assembly of a rack of a back suspension bracket