Check and adjustment of corners of installation of forward wheels. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.1.1. Removal and installation of a rack of a forward suspension bracket
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket
7.1.3. Removal and installation of the stabilizer of cross-section stability
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket
7.1.5. Check and adjustment of corners of installation of forward wheels
7.1.6. Replacement of the bearing of a nave of a forward wheel
7.2. Back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 







993f9bf4 993f9bf4 993f9bf4 canadian pharmacies online reviews

7-1-5-proverka-i-regulirovka-uglov-ustanovki-perednikh-koles.html

7.1.5. Check and adjustment of corners of installation of forward wheels

Check is carried out only on the equipped car established on an equal horizontal platform.
Before check execute the following:
— check and finish to norm pressure of air in tires;
— be convinced that on each axis tires of the identical size, with identical wear of a protector are established;
— check hinges of a forward suspension bracket and bearings of naves of forward wheels and eliminate люфты, having replaced worn-out details;
— shake a car suspension bracket, having made several times effort from top to down in an average part at first back, and then a front bumper. Thus wheels should be located in the provision of rectilinear movement.
By means of the optical device measure real values of corners of installation of wheels and compare them with specified in tab. 5.1.

Fig. 5.8. Adjustment of a convergence of forward wheels: 1 — a lock-nut of steering draft; 2 — steering draft; 3 — a nut of the spherical hinge of steering draft


On the Nissan Almera car the convergence of forward wheels is subject to adjustment only. For this purpose evenly rotate steering drafts of both wheels on equal size (fig. 5.8).
In case of a considerable deviation of other parameters check suspension bracket details on possible deformation or wear.

Table 5.1  Corners of installation of forward wheels
Name
Size
Corner развала*
— 0°35 '±45'
Convergence, mm
2±2 (0°11 '±11')
Corner of a longitudinal inclination шкворня*
1°25 '±45'
Corner of a cross-section inclination шкворня*
14°45 '±45'
Angle of rotation колеса*:

cars with the petrol engine:

the external
34 °
the internal
41 ° + 1 °
cars with the diesel engine:

the external
31 °
the internal
37 ° — 3 °
* For the reference.

«previous page
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket
following page»
7.1.6. Replacement of the bearing of a nave of a forward wheel