Removal and installation of the stabilizer of cross-section stability. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.1.1. Removal and installation of a rack of a forward suspension bracket
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket
7.1.3. Removal and installation of the stabilizer of cross-section stability
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket
7.1.5. Check and adjustment of corners of installation of forward wheels
7.1.6. Replacement of the bearing of a nave of a forward wheel
7.2. Back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4 canadian pharmacies that ship us

7-1-3-snyatie-i-ustanovka-stabilizatora-poperechnojj-ustojjchivosti.html

7.1.3. Removal and installation of the stabilizer of cross-section stability

Lift and establish on supports a forward part of the car. Remove wheels. Turn out bolts of fastening of collars of pillows of the stabilizer to a suspension bracket cross-piece. Unscrew nuts of fastening of racks of the stabilizer to suspension bracket levers. Carefully take out the stabilizer together with its racks through a wheel arch.
Installation is carried out as it should be, the return to removal, taking into account the following.
Replace new rubber pillows of the stabilizer.
Labels on a bar of the stabilizer should be turned to a back part of the car.

«previous page
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket
following page»
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket