Removal and installation of a rack of a forward suspension bracket. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.1.1. Removal and installation of a rack of a forward suspension bracket
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket
7.1.3. Removal and installation of the stabilizer of cross-section stability
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket
7.1.5. Check and adjustment of corners of installation of forward wheels
7.1.6. Replacement of the bearing of a nave of a forward wheel
7.2. Back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 







993f9bf4 993f9bf4 993f9bf4

7-1-1-snyatie-i-ustanovka-stojjki-perednejj-podveski.html

7.1.1. Removal and installation of a rack of a forward suspension bracket


Fig. 5.4. Fastening of a rack of a forward suspension bracket to a body: 1 — a nut of a rod of the shock-absorber;
2 — a nut of fastening are resistant to a body


Lift a forward part of the car, establish on supports, remove a wheel. Unscrew nuts of fastening of the top support of a rack to a body (fig. 5.4). Disconnect a collar of fastening of a brake hose to a suspension bracket rack. Turn out two bolts of the bottom fastening of a rack to a rotary fist and take out their (fig. 5.5). By means of mount separate a rack from a rotary fist. Carefully take out a rack assembled through a wheel arch.

Fig. 5.5. Bolts of fastening are resistant to a rotary fist


Fig. 5.6. An arrangement of a label which should be directed towards a wheel


Installation of a rack carry out as it should be, the return to removal. Track that the label on the top support of the shock-absorber was directed towards a car wheel (fig. 5.6). A final inhaling of carving connections make after lowering of wheels on the earth.

«previous page
7.1. Forward suspension bracket
following page»
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket