Removal and installation of shaft of a drive of forward wheels. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
6.1. Coupling
6.2. Mechanical transmission
6.3. Automatic transmission
6.4. Drive of forward wheels
6.4.1. General information
6.4.2. Removal and installation of shaft of a drive of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 







993f9bf4 993f9bf4 993f9bf4 onlinepharmaciescanada.com

6-4-2-snyatie-i-ustanovka-valov-privoda-perednikh-koles.html

6.4.2. Removal and installation of shaft of a drive of forward wheels


Fig. 4.56. Details of a drive of a forward wheel: I\petrol engine; II\diesel engine; 1 — the external hinge of equal angular speeds; 2 — a collar of fastening of a protective cover; 3 — a protective cover; 4, 9 — lock rings; 5 — a shaft; 6 — anti-vibrating cargo; 7 — a collar of anti-vibrating cargo; 8 — the tripod type hinge;
10 — the case of the internal hinge of equal angular speeds; And — distance between an external edge of cargo and an external surface of the external hinge


At works be guided fig. 4.56. Merge oil from a transmission. Lift a forward part of the car and remove a wheel from the necessary party. On the car with an automatic transmission for removal of the right shaft at first remove the left shaft of a drive.

Fig. 4.57. Removal of the internal hinge of equal angular speeds


Disconnect a collar of fastening of a brake hose from a rack of a forward suspension bracket. Unscrew two bolts of fastening directing brake shoes, remove directing and attach it a wire to an arch of a forward wheel, without loading a brake hose. Block from rotation by means of the adaptation a wheel nave, take out шплинт, turn on and remove a nut of fastening of a nave. Unscrew a nut of fastening of a finger of the spherical hinge of steering draft and by means of a universal stripper выпрессуйте a finger from a rotary fist. Unscrew two bolts of fastening of a rotary fist to a rack of a forward suspension bracket and disconnect a fist from a rack. Turn down a rotary fist and take from a nave the external hinge of a shaft of a drive. To extraction of the internal hinge from the case of a transmission apply any lever as the hinge fastens in a semi-axial gear wheel by means of a lock spring ring therefore the considerable effort for its removal (fig. 4.57) is required to make.

Fig. 4.58. Vypressovka of a drive of a forward right wheel from a case of an automatic transmission: 1 — a screw-driver edge; 2 — an axis of satellites; 3 — a shlitsevy shaft of a drive of a forward wheel; 4 — a semi-axial gear wheel; 5 — a screw-driver


For removal of a shaft of a drive of a forward wheel on the right side on cars with an automatic transmission insert, as is shown in fig. 4.58, a screw-driver and выпрессуйте the hinge of equal angular speeds through an exhaust outlet of differential for the left shaft. Take out a drive shaft, watching existence of a lock ring on shlitsa of the internal hinge.
At installation of a power shaft replace everything самоконтрящиеся nuts. Establish in a transmission case a new epiploon, having filled its working part with greasing. Replace a lock ring on a shaft of the internal hinge. Carefully enter a shaft into an opening of a semi-axial gear wheel to feeling of a zashchelkivaniye of a lock ring. Check shaft latching by twitching it in the axial direction. Establish a tail part of the external hinge in an opening of a nave of a wheel. Other operations carry out as it should be, the return to removal. Tighten the set moment a nut of a nave of a forward wheel. Fill in oil in a transmission.

«previous page
6.4.1. General information
following page»
7. Running gear