Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.2.17.1. Installation
6.3. Tables
7. Onboard electric equipment
8. Body
 








6-2-17-snyatie-i-ustanovka-gidravlicheskogo-bloka-antiblokirovochnojj-sistemy-tormozov.html

6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes





ATTENTION
Internal elements of the hydraulic block of anti-blocking system of brakes can be damaged when falling block on a firm surface. Watch to dropping the hydraulic block of anti-blocking system of brakes. Replace the hydraulic block of anti-blocking system of brakes if it underwent blow.

Hydroblock of anti-blocking system of brakes
Fig. 6.61. Hydroblock of anti-blocking system of brakes: 1–socket; 2–brake highway; 3–knot of the hydraulic block of anti-blocking system of brakes, arm; 4–arm; 5–control unit of anti-blocking system of brakes; 6–hydraulic block of anti-blocking system of brakes



Remove the storage battery and a platform of the storage battery.
Remove a hose (models with a mechanical transmission).

Socket detachment
Fig. 6.62. Socket detachment


Lift a socket cover in the arrow direction, pressing thus a cover uvula (fig. 6.62).
Pull the socket to a forward part of the car and remove it.

Drawing of adjusting labels on the brake highway and the hydraulic block of anti-blocking system of brakes
Fig. 6.63. Drawing of adjusting labels on the brake highway and the hydraulic block of anti-blocking system of brakes


Put an adjusting label on the brake highway and the hydraulic block of anti-blocking system of brakes (fig. 6.63).
Wind the socket with a protective tape to prevent hit of brake liquid inside.
Remove the brake highway.

Removal of knot of the hydraulic block of anti-blocking system of brakes
Fig. 6.64. Removal of knot of the hydraulic block of anti-blocking system of brakes


As is shown in drawing 6.64, move an arm in the direction of an arrow and remove knot of the hydraulic block of anti-blocking system of brakes and an arm from a body.

«previous page
6.2.16.4. Check of a form of a signal
following page»
6.2.17.1. Installation