Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.10.1. Check of operation of the vacuum amplifier
6.2.10.2. Tightness check
6.2.10.3. Check and adjustment of length of an acting rod
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








6-2-10-proverka-vakuumnogo-usilitelya-tormozov.html

6.2.10. Check of the vacuum amplifier of brakes




Operation of the vacuum amplifier of the brakes located on a motor board, is based on use of depression of an inlet collector and pressure of atmospheric air. After completion of each operation including removal of any of elements of brake system, make a control trip for check of work of brakes of the car. Check brakes at movement on the pure, dry and equal road. Other test conditions can lead to inexact results. Check brakes at various speeds, both at low, and at big load of brakes. The car should stop evenly, without withdrawal aside. Avoid blocking of brakes as tires are as a result damaged and efficiency and controllability decreases when braking.
Work of brakes is influenced also by a condition of tires, loading of the car and corners of installation of forward wheels.

«previous page
6.2.9.2. Installation
following page»
6.2.10.1. Check of operation of the vacuum amplifier