Removal and installation of the water pump. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
4.1. Removal and installation of the power unit
4.2. Dismantling and engine assembly
4.3. Block of cylinders
4.4. Shatunno-porshnevaya group
4.5. Cranked shaft and flywheel
4.6. Gazoraspredeleniye mechanism
4.7. Head of the block of cylinders of GA14DE and GA16DE engines
4.8. Head of the block of cylinders of the SR20DE engine
4.9. Cooling system
4.9.1. Removal, installation and adjustment of a tension of a belt of a drive of the water pump
4.9.2. Removal and installation of the water pump
4.9.3. Washing and filling of system of cooling
4.10. Greasing system
4.11. System of production of the fulfilled gases
4.12. Power supply system
4.13. Complex control system of the engine (KSUD)
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

4-9-2-snyatie-i-ustanovka-vodyanogo-nasosa.html

4.9.2. Removal and installation of the water pump

Remove a belt of a drive of the water pump. Merge cooling liquid. Turn out bolts of fastening of a pulley of the water pump and remove a pulley. Turn out bolts of fastening of the case of the thermostat to the water pump. Turn out bolts of fastening of the pump and remove it. At existence люфта bearings, wear tracks, deformations of working surfaces of the pump replace it.
Before installation clear a pump installation site of the laying and hermetic remains. Put on the cleared places hermetic and establish the pump.
Other operations execute as it should be, the return to removal. Start up the engine and be convinced of lack of a leak.


«previous page
4.9.1. Removal, installation and adjustment of a tension of a belt of a drive of the water pump
following page»
4.9.3. Washing and filling of system of cooling