3.18.3. Car movement with an automatic transmission

The operations procedure at a start of motion should be following:

— establish the selector lever in the situation "N";

— press a brake pedal;

— start up the engine a starter, without releasing a brake pedal;

— without raising frequency of rotation idling the engine, move the selector lever to one of movement provisions («D», «R», «2» or «1»);

— release a pedal of a brake and begin movement.

PREVENTIONS 1. Do not raise engine turns idling. It can lead to a sudden start of motion of the car if the lever of the selector is established in provisions "D", "R", "2" or "1", or to engine breakage if it is in the situation "N" or "R". 2. On the models equipped with the button of blocking of the lever of the selector, for transition from the situation "R" on any transfer of movement it is necessary to press a brake pedal. The mechanism of blocking works only when the ignition key or the switch of devices and a starter is in the situation "ON". 3. Observe the increased care at gear shifting (both forward, and a backing) until the engine will not get warm, as idling turns at the cold engine are higher, than at the heated-up. 4. At a parking, even for short time, transfer the selector lever to the situation "N" and put the car on the parking brake. In case of a car stop on lifting it is necessary to press a brake pedal, previously having switched the selector in the situation "N" to hold the car on a place and to protect transmission from an overheat.