Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Check and adjustment of a pedal of coupling
3.1.2.1. Adjustment of height of provision of a pedal
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
3.1.2.3. Verification of the provision of switching off of coupling
3.1.2.4. Removal and installation of a pedal of coupling
3.1.2.5. Removal and installation of tubes of a hydraulic actuator of coupling
3.1.2.6. Removal and installation of the main cylinder of a drive of switching off of coupling
3.1.2.7. Removal, check and coupling installation
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-1-2-3-proverka-polozheniya-vyklyucheniya-scepleniya.html

3.1.2.3. Verification of the provision of switching off of coupling

Extend the lever of the parking brake so that wheels were blocked.
Start the engine and let's to it work on an idling mode.
At not pressed pedal of coupling slowly include backing transfer.
Fix the gear shifting lever in situation when gear wheels will enter into gearing.
Slowly press a coupling pedal.
Stop a coupling pedal when noise of gear wheels (the provision of switching off of coupling) will stop.
Measure distance And (distance from the provision of switching off of coupling to the provision of completely pressed pedal) and a course of a pedal of coupling.

Scheme of verification of the provision of switching off of coupling
Fig. 3.5. Scheme of verification of the provision of switching off of coupling


Be convinced that distance And and a course of a pedal of coupling correspond to the established norms (fig. 3.5).
Distance "And": 20 mm.
Pedal course: 140 mm.

«previous page
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
following page»
3.1.2.4. Removal and installation of a pedal of coupling