Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Check and adjustment of a pedal of coupling
3.1.2.1. Adjustment of height of provision of a pedal
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
3.1.2.3. Verification of the provision of switching off of coupling
3.1.2.4. Removal and installation of a pedal of coupling
3.1.2.5. Removal and installation of tubes of a hydraulic actuator of coupling
3.1.2.6. Removal and installation of the main cylinder of a drive of switching off of coupling
3.1.2.7. Removal, check and coupling installation
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-1-2-1-regulirovka-vysoty-polozheniya-pedali.html

3.1.2.1. Adjustment of height of provision of a pedal

Scheme of adjustment of height of provision of a pedal
Fig. 3.3. Scheme of adjustment of height of provision of a pedal


Measure distance from an overlay of a pedal to a floor covering. If necessary adjust height of provision of a pedal of coupling. For this purpose weaken a lock-nut And and rotate an adjusting bolt In before installation of the demanded height of provision of a pedal of coupling. After adjustment tighten a lock-nut (fig. 3.3).
Height of provision of a pedal: 210–216 mm.

«previous page
3.1.2. Check and adjustment of a pedal of coupling
following page»
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling