Removal and heater installation. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Body repair
11.3. Heating and ventilation system
11.3.1. Removal and installation of the electrofan of a heater
11.3.2. Removal and heater installation
11.3.3. Removal and installation of a radiator of a heater
11.3.4. Replacement of the air filter of system of ventilation of salon
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

11-3-2-snyatie-i-ustanovka-otopitelya.html

11.3.2. Removal and heater installation


Fig. 8.17. An arrangement and numbering of safety locks in the assembly block in car salon



Remove the minus plug from the storage battery. Remove the dashboard. Remove the assembly block in car salon (see fig. 8.17) and take aside a plait of wires. Remove fastenings of a steering column to a cross-section arm and take a column aside.
Remove an arm of fastening of a steering column. Establish in a motor compartment clips on the hoses suitable to a radiator of a heater, and disconnect hoses. Muffle openings of a radiator of a heater. Disconnect cables of management of a heater. Turn out bolts of fastening of a heater to a front guard, and also bolts of fastening of a casing of the fan or the evaporator case, depending on complete set option. Remove a heater and take out air lines. Clear surfaces of air lines and a heater.
Installation make as it should be, the return to removal. Be convinced of the correct accession of air lines. Check level of cooling liquid and be convinced of normal work of a heater and ventilation.

«previous page
11.3.1. Removal and installation of the electrofan of a heater
following page»
11.3.3. Removal and installation of a radiator of a heater