Removal and installation of window regulators of lobbies and back doors. Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Body repair
11.2.1. Removal and cowl installation
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of lobbies and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of lobbies and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (type body hatchback)
11.2.13. Removal and trunk lid installation (type body sedan)
11.2.14. Removal and dashboard installation
11.3. Heating and ventilation system
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

11-2-8-snyatie-i-ustanovka-steklopodemnikov-perednikh-i-zadnikh-dverejj.html

11.2.8. Removal and installation of window regulators of lobbies and back doors


Fig. 9.25. Details of window regulators: And — a window regulator with a manual drive; B — an electric window regulator; In — a back door; G — a forward door; 1 — the frame flew down; 2 — glass; 3 — a directing fillet; 4 — loops; 5 — the limiter of opening of a door; 6 — an electric window regulator; 7 — the window regulator handle; 8 — a window regulator with a manual drive; 9 — back motionless glass; 10 — a frame of motionless glass


Details of the mechanism of a window regulator of back and forward doors are given on fig. 9.25.

Fig. 9.26. Details of doors: And — a forward door; B — a back door; 1 — a bolt of fastening of the electric motor of a window regulator; 2 — bolts of fastening of a directing rack of glass; 3 — bolts of fastening of the adjusting device of a drive of the lock of a door; 4 — a bolt of fastening of the internal handle of a drive of the lock; 5 — bolts of fastening of a back directing fillet; 6 — bolts of fastening of opuskny glass to a holder; 7 — bolts of fastening of the lateral amplifier of a door


Remove a door upholstery (see above). Remove the sealing panel. On the car with an electrowindow regulator temporarily join the socket and establish glass so that bolts 6 (fig. 9.26) of fastening of lowered glass to a holder were visible Turn out these bolts and by means of a sticky tape fix glass in such situation. On a forward door remove a plate of the lateral amplifier. Turn out bolts of a mechanical window regulator and remove it. On cars with electrowindow regulators turn out bolts of fastening of the electric motor to a window regulator drive, previously having disconnected its electrosocket.
Installation of a window regulator make as it should be, the return to its removal.

«previous page
11.2.7. Removal and installation of an upholstery of back doors
following page»
11.2.9. Removal and installation of the external handle of a door