Removal and trunk lid installation (type body sedan). Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Body repair
11.2.1. Removal and cowl installation
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of lobbies and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of lobbies and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (type body hatchback)
11.2.13. Removal and trunk lid installation (type body sedan)
11.2.14. Removal and dashboard installation
11.3. Heating and ventilation system
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

11-2-13-snyatie-i-ustanovka-kryshki-bagazhnika-kuzov-tipa-sedan.html

11.2.13. Removal and trunk lid installation (type body sedan)


Fig. 9.32. Trunk lid details: 1 — a trunk lid; 2 — a loop;
3 — торсион; 4 — the trunk lid lock; 5 — the buffer; 6 — an arm of a lamp of illumination of registration plate; 7 — a cable of a drive of the lock of a trunk lid;
8 — the handle of a drive of the lock of a trunk lid; 9 — draft


Details of a trunk lid are given on fig. 9.32.

Fig. 9.33. Removal and trunk lid adjustment: And — trunk lid fastening; B — fastening of a clamp of the lock; In — adjustment of the lock and a cable of a drive of the lock; 1 — bolts of fastening and trunk lid adjustment; 2 — screws of fastening and adjustment of a clamp of the lock; 3 — screws of fastening and lock adjustment; 4 — the screw of adjustment of a cable of a drive of the lock


Turn out two bolts of the top fastening of loops to a trunk lid. Supporting a cover, turn out two bolts of the bottom fastening of loops to a trunk lid. Uncover a luggage carrier. Installation of a trunk lid make as it should be, the return to removal. Thus pay attention to uniformity of a gap between a trunk lid and back wings. If necessary make adjustment (fig. 9.33).Проверьте and adjust the provision of a clamp of the lock of a trunk lid so that there was no gap in moving of a cable of a drive of the lock.


«previous page
11.2.12. Removal and installation of a door of a back (type body hatchback)
following page»
11.2.14. Removal and dashboard installation