Removal and installation of a door of a back (type body hatchback). Nissan Almera (from 1995 to 1999 of release)
Nissan Almera service from 1995 to 2000 in N15 body
1. General information
2. The general requirements to car repairs
3. Operation and car maintenance
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Body repair
11.2.1. Removal and cowl installation
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of lobbies and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of lobbies and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (type body hatchback)
11.2.13. Removal and trunk lid installation (type body sedan)
11.2.14. Removal and dashboard installation
11.3. Heating and ventilation system
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Electric equipment schemes
 









993f9bf4 993f9bf4 993f9bf4

11-2-12-snyatie-i-ustanovka-dveri-zadka-kuzov-tipa-khehtchbek.html

11.2.12. Removal and installation of a door of a back (type body hatchback)


Fig. 9.30. Details of a door of a back: 1 — a back door; 2 — loops; 3 — a gas-filled emphasis; 4 — a sealant of a doorway of a back; 5 — the buffer; 6 — an arm of a lamp of illumination of registration plate; 7 — glass; 8 — a glass sealant; 9 — the lock;
10 — draft of a drive of the lock; 11 — the handle of a drive of the lock


Details of a door of a back are shown on fig. 9.30.
Disconnect a wire from the minus plug of the storage battery. Remove an upholstery of a door of a back.

Fig. 9.31. Removal and adjustment of a door of a back:
And — fastening of a door of a back; B — fastening of a clamp of the lock; In — lock adjustment; 1 — bolts of fastening of a door of a back; 2 — bolts of fastening of a gas-filled emphasis of a door of a back; 3 — bolts of fastening and adjustment of a clamp of the lock; 4 — bolts of fastening and lock adjustment


Disconnect from glass of a wire of a heater and disconnect its shtekerny socket. Disconnect and remove electric wires of a heater of back glass. Holding a door, turn out bolts of fastening of a gas-filled emphasis (fig. 9.31). Turn out bolts of fastening of loops to a door of a back and remove a back door.
Installation of a door of a back make as it should be, the return to removal. Thus pay attention to uniformity of a gap between a door and back wings. If necessary make adjustment of provision of a clamp and the door lock.


«previous page
11.2.11. Removal and installation of glasses
following page»
11.2.13. Removal and trunk lid installation (type body sedan)